Vanguard WRM-40 Manuel d'utilisateur télécharger pdf (Page 14)

WRM-10P AND WRM-40 USER’S MANUAL REV 3

2.0 PRE-TEST SETUP

2.1 Operating Voltages

The WRM’s operating voltage is preset at the factory and is selectable between 100-120 Vac,

50/60 Hz or 200-240 Vac, 50/60 Hz. The voltage is set by placing jumper(s) on the power

terminal block as listed in Table 5 and illustrated in Figure 3 and Figure 4. The relay must also be

changed if the voltage settings are changed. Please see Figure 5 and Figure 6 for the location of

the relays.

Table 5. Voltage Selection Jumper Settings

Voltage

Selection

Terminal Block Jumpers

Relay

Part Number

100

–

120 Vac

Brown to Blue and Yellow to Green HE2aN-Q-AC120V

200

–

240 Vac

Blue to Yellow HE2aN-Q-AC-240V

Figure 3. 100 – 120 Vac Jumper Settings

Figure 4. 200 – 240 Vac Jumper Settings

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 61 62

Pas de commentaire

Vanguard WRM-40 Manuel d'utilisateur Page 14